#keywords smartd #title Smartd 에서 보여주는 disk error code table [[TableOfContents]] == Error code table == {{{ Table A.1 Logical Unit Sense Key, ASC and ASCQ Assignments SK ASC ASCQ 0 / 00 / 00 NO ADDITIONAL SENSE INFORMATION B / 00 / 06 I/O PROCESS TERMINATED 5 / 00 / 11 AUDIO PLAY OPERATION IN PROGRESS 5 / 00 / 12 AUDIO PLAY OPERATION PAUSED 5 / 00 / 13 AUDIO PLAY OPERATION SUCCESSFULLY COMPLETED 5 / 00 / 14 AUDIO PLAY OPERATION STOPPED DUE TO ERROR 5 / 00 / 15 NO CURRENT AUDIO STATUS TO RETURN 4 / 00 / 17 CLEANING REQUESTED 3 / 02 / 00 NO SEEK COMPLETE 2 / 04 / 00 LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE 2 / 04 / 01 LOGICAL UNIT IS IN PROCESS OF BECOMING READY 2 / 04 / 02 LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUIRED 2 / 04 / 03 LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED 2 / 04 / 04 LOGICAL UNIT NOT READY, FORMAT IN PROGRESS 2 / 04 / 07 LOGICAL UNIT NOT READY, OPERATION IN PROGRESS 2 / 04 / 08 LOGICAL UNIT NOT READY, LONG WRITE IN PROGRESS 4 / 05 / 00 LOGICAL UNIT DOES NOT RESPOND TO SELECTION 3 / 06 / 00 NO REFERENCE POSITION FOUND 5 / 07 / 00 MULTIPLE PERIPHERAL DEVICES SELECTED 4 / 08 / 00 LOGICAL UNIT COMMUNICATION FAILURE 4 / 08 / 01 LOGICAL UNIT COMMUNICATION TIME-OUT 4 / 08 / 02 LOGICAL UNIT COMMUNICATION PARITY ERROR 4 / 08 / 03 LOGICAL UNIT COMMUNICATION CRC ERROR (ULTRA-DMA/32) 4 / 09 / 00 TRACK FOLLOWING ERROR 4 / 09 / 01 TRACKING SERVO FAILURE 4 / 09 / 02 FOCUS SERVO FAILURE 4 / 09 / 03 SPINDLE SERVO FAILURE 4 / 09 / 04 HEAD SELECT FAULT 6 / 0A / 00 ERROR LOG OVERFLOW 1 / 0B / 00 WARNING 1 / 0B / 01 WARNING - SPECIFIED TEMPERATURE EXCEEDED 1 / 0B / 02 WARNING - ENCLOSURE DEGRADED 3 / 0C / 00 WRITE ERROR 3 / 0C / 07 WRITE ERROR - RECOVERY NEEDED 3 / 0C / 08 WRITE ERROR - RECOVERY FAILED 3 / 0C / 09 WRITE ERROR - LOSS OF STREAMING 3 / 0C / 0A WRITE ERROR - PADDING BLOCKS ADDED 3 / 11 / 00 UNRECOVERED READ ERROR 3 / 11 / 01 READ RETRIES EXHAUSTED 3 / 11 / 02 ERROR TOO LONG TO CORRECT 3 / 11 / 05 L-EC UNCORRECTABLE ERROR 3 / 11 / 06 CIRC UNRECOVERED ERROR 3 / 11 / 0F ERROR READING UPC/EAN NUMBER 3 / 11 / 10 ERROR READING ISRC NUMBER B / 11 / 11 READ ERROR - LOSS OF STREAMING 3 / 15 / 00 RANDOM POSITIONING ERROR 3 / 15 / 01 MECHANICAL POSITIONING ERROR 3 / 15 / 02 POSITIONING ERROR DETECTED BY READ OF MEDIUM 1 / 17 / 00 RECOVERED DATA WITH NO ERROR CORRECTION APPLIED 1 / 17 / 01 RECOVERED DATA WITH RETRIES 1 / 17 / 02 RECOVERED DATA WITH POSITIVE HEAD OFFSET 1 / 17 / 03 RECOVERED DATA WITH NEGATIVE HEAD OFFSET 1 / 17 / 04 RECOVERED DATA WITH RETRIES AND/OR CIRC APPLIED 1 / 17 / 05 RECOVERED DATA USING PREVIOUS SECTOR ID 1 / 17 / 07 RECOVERED DATA WITHOUT ECC - RECOMMEND REASSIGNMENT 1 / 17 / 08 RECOVERED DATA WITHOUT ECC - RECOMMEND REWRITE 1 / 17 / 09 RECOVERED DATA WITHOUT ECC - DATA REWRITTEN 1 / 18 / 00 RECOVERED DATA WITH ERROR CORRECTION APPLIED 1 / 18 / 01 RECOVERED DATA WITH ERROR CORR. & RETRIES APPLIED 1 / 18 / 02 RECOVERED DATA - DATA AUTO-REALLOCATED 1 / 18 / 03 RECOVERED DATA WITH CIRC 1 / 18 / 04 RECOVERED DATA WITH L-EC 1 / 18 / 05 RECOVERED DATA . RECOMMEND REASSIGNMENT 1 / 18 / 06 RECOVERED DATA . RECOMMEND REWRITE 1 / 18 / 08 RECOVERED DATA WITH LINKING 5 / 1A / 00 PARAMETER LIST LENGTH ERROR 4 / 1B / 00 SYNCHRONOUS DATA TRANSFER ERROR A / 1D / 00 MISCOMPARE DURING VERIFY OPERATION 5 / 20 / 00 INVALID COMMAND OPERATION CODE 5 / 21 / 00 LOGICAL BLOCK ADDRESS OUT OF RANGE 5 / 21 / 01 INVALID ELEMENT ADDRESS 5 / 21 / 02 INVALID ADDRESS FOR WRITE 5 / 24 / 00 INVALID FIELD IN CDB 5 / 25 / 00 LOGICAL UNIT NOT SUPPORTED 5 / 26 / 00 INVALID FIELD IN PARAMETER LIST 5 / 26 / 01 PARAMETER NOT SUPPORTED 5 / 26 / 02 PARAMETER VALUE INVALID 5 / 26 / 03 THRESHOLD PARAMETERS NOT SUPPORTED 5 / 26 / 04 INVALID RELEASE OF ACTIVE PERSISTENT RESERVATION 5 / 27 / 00 WRITE PROTECTED 5 / 27 / 01 HARDWARE WRITE PROTECTED 5 / 27 / 02 LOGICAL UNIT SOFTWARE WRITE PROTECTED 5 / 27 / 03 ASSOCIATED WRITE PROTECT 5 / 27 / 04 PERSISTENT WRITE PROTECT 5 / 27 / 05 PERMANENT WRITE PROTECT 7 / 27 / 06 CONDITIONAL WRITE PROTECT 6 / 28 / 00 NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED 6 / 28 / 01 IMPORT OR EXPORT ELEMENT ACCESSED 6 / 29 / 00 POWER ON, RESET, OR BUS DEVICE RESET OCCURRED 6 / 29 / 01 POWER ON OCCURRED 6 / 29 / 02 SCSI BUS RESET OCCURRED 6 / 29 / 03 BUS DEVICE RESET FUNCTION OCCURRED 6 / 29 / 04 DEVICE INTERNAL RESET 6 / 2A / 00 PARAMETERS CHANGED 6 / 2A / 01 MODE PARAMETERS CHANGED 6 / 2A / 02 LOG PARAMETERS CHANGED 6 / 2A / 03 RESERVATIONS PREEMPTED 5 / 2B / 00 COPY CANNOT EXECUTE SINCE INITIATOR CANNOT DISCONNECT 5 / 2C / 00 COMMAND SEQUENCE ERROR 5 / 2C / 03 CURRENT PROGRAM AREA IS NOT EMPTY 5 / 2C / 04 CURRENT PROGRAM AREA IS EMPTY 6 / 2E / 00 INSUFFICIENT TIME FOR OPERATION 6 / 2F / 00 COMMANDS CLEARED BY ANOTHER INITIATOR 2 / 30 / 00 INCOMPATIBLE MEDIUM INSTALLED 2 / 30 / 01 CANNOT READ MEDIUM . UNKNOWN FORMAT 2 / 30 / 02 CANNOT READ MEDIUM . INCOMPATIBLE FORMAT 2 / 30 / 03 CLEANING CARTRIDGE INSTALLED 2 / 30 / 04 CANNOT WRITE MEDIUM . UNKNOWN FORMAT 2 / 30 / 05 CANNOT WRITE MEDIUM . INCOMPATIBLE FORMAT 2 / 30 / 06 CANNOT FORMAT MEDIUM . INCOMPATIBLE MEDIUM 2 / 30 / 07 CLEANING FAILURE 5 / 30 / 08 CANNOT WRITE . APPLICATION CODE MISMATCH 5 / 30 / 09 CURRENT SESSION NOT FIXATED FOR APPEND 5 / 30 / 10 MEDIUM NOT FORMATTED 3 / 31 / 00 MEDIUM FORMAT CORRUPTED 3 / 31 / 01 FORMAT COMMAND FAILED 3 / 31 / 02 ZONED FORMATTING FAILED DUE TO SPARE LINKING / 34 / 00 ENCLOSURE FAILURE / 35 / 00 ENCLOSURE SERVICES FAILURE / 35 / 01 UNSUPPORTED ENCLOSURE FUNCTION / 35 / 02 ENCLOSURE SERVICES UNAVAILABLE / 35 / 03 ENCLOSURE SERVICES TRANSFER FAILURE / 35 / 04 ENCLOSURE SERVICES TRANSFER REFUSED 1 / 37 / 00 ROUNDED PARAMETER 5 / 39 / 00 SAVING PARAMETERS NOT SUPPORTED 2 / 3A / 00 MEDIUM NOT PRESENT 2 / 3A / 01 MEDIUM NOT PRESENT - TRAY CLOSED 2 / 3A / 02 MEDIUM NOT PRESENT - TRAY OPEN 6 / 3B / 0D MEDIUM DESTINATION ELEMENT FULL 6 / 3B / 0E MEDIUM SOURCE ELEMENT EMPTY 6 / 3B / 0F END OF MEDIUM REACHED 6 / 3B / 11 MEDIUM MAGAZINE NOT ACCESSIBLE 6 / 3B / 12 MEDIUM MAGAZINE REMOVED 6 / 3B / 13 MEDIUM MAGAZINE INSERTED 6 / 3B / 14 MEDIUM MAGAZINE LOCKED 6 / 3B / 15 MEDIUM MAGAZINE UNLOCKED 4 / 3B / 16 MECHANICAL POSITIONING OR CHANGER ERROR 5 / 3D / 00 INVALID BITS IN IDENTIFY MESSAGE 2 / 3E / 00 LOGICAL UNIT HAS NOT SELF-CONFIGURED YET 4 / 3E / 01 LOGICAL UNIT FAILURE 4 / 3E / 02 TIMEOUT ON LOGICAL UNIT 6 / 3F / 00 TARGET OPERATING CONDITIONS HAVE CHANGED 6 / 3F / 01 MICROCODE HAS BEEN CHANGED 6 / 3F / 02 CHANGED OPERATING DEFINITION 6 / 3F / 03 INQUIRY DATA HAS CHANGED 4 / 40 / NN DIAGNOSTIC FAILURE ON COMPONENT NN (80H-FFH) 5 / 43 / 00 MESSAGE ERROR 4 / 44 / 00 INTERNAL TARGET FAILURE B / 45 / 00 SELECT OR RESELECT FAILURE 4 / 46 / 00 UNSUCCESSFUL SOFT RESET 4 / 47 / 00 SCSI PARITY ERROR B / 48 / 00 INITIATOR DETECTED ERROR MESSAGE RECEIVED B / 49 / 00 INVALID MESSAGE ERROR 4 / 4A / 00 COMMAND PHASE ERROR 4 / 4B / 00 DATA PHASE ERROR 4 / 4C / 00 LOGICAL UNIT FAILED SELF-CONFIGURATION B / 4D / NN TAGGED OVERLAPPED COMMANDS (NN = QUEUE TAG) B / 4E / 00 OVERLAPPED COMMANDS ATTEMPTED 3 / 51 / 00 ERASE FAILURE 3 / 51 / 01 ERASE FAILURE - INCOMPLETE ERASE OPERATION DETECTED 4 / 53 / 00 MEDIA LOAD OR EJECT FAILED 5 / 53 / 02 MEDIUM REMOVAL PREVENTED 5 / 55 / 00 SYSTEM RESOURCE FAILURE 3 / 57 / 00 UNABLE TO RECOVER TABLE-OF-CONTENTS 6 / 5A / 00 OPERATOR REQUEST OR STATE CHANGE INPUT 6 / 5A / 01 OPERATOR MEDIUM REMOVAL REQUEST 6 / 5A / 02 OPERATOR SELECTED WRITE PROTECT 6 / 5A / 03 OPERATOR SELECTED WRITE PERMIT 6 / 5B / 00 LOG EXCEPTION 6 / 5B / 01 THRESHOLD CONDITION MET 6 / 5B / 02 LOG COUNTER AT MAXIMUM 6 / 5B / 03 LOG LIST CODES EXHAUSTED 1 / 5D / 01 FAILURE PREDICTION THRESHOLD EXCEEDED . Predicted Media failure 1 / 5D / 02 LOGICAL UNIT FAILURE PREDICTION THRESHOLD EXCEEDED 1 / 5D / 03 FAILURE PREDICTION THRESHOLD EXCEEDED . Predicted Spare Area Exhaustin 1 / 5D / FF FAILURE PREDICTION THRESHOLD EXCEEDED (FALSE) 6 / 5E / 00 LOW POWER CONDITION ON 6 / 5E / 01 IDLE CONDITION ACTIVATED BY TIMER 6 / 5E / 02 STANDBY CONDITION ACTIVATED BY TIMER 6 / 5E / 03 IDLE CONDITION ACTIVATED BY COMMAND 6 / 5E / 04 STANDBY CONDITION ACTIVATED BY COMMAND 5 / 63 / 00 END OF USER AREA ENCOUNTERED ON THIS TRACK 5 / 63 / 01 PACKET DOES NOT FIT IN AVAILABLE SPACE 5 / 64 / 00 ILLEGAL MODE FOR THIS TRACK 5 / 64 / 01 INVALID PACKET SIZE 4 / 65 / 00 VOLTAGE FAULT 5 / 6F / 00 COPY PROTECTION KEY EXCHANGE FAILURE . AUTHENTICATION FAILURE 5 / 6F / 01 COPY PROTECTION KEY EXCHANGE FAILURE . KEY NOT PRESENT 5 / 6F / 02 COPY PROTECTION KEY EXCHANGE FAILURE .KEY NOT ESTABLISHED 5 / 6F / 03 READ OF SCRAMBLED SECTOR WITHOUT AUTHENTICATION 5 / 6F / 04 MEDIA REGION CODE IS MISMATCHED TO LOGICAL UNIT REGION 5 / 6F / 05 LOGICAL UNIT REGION MUST BE PERMANENT/REGION RESET COUNT ERROR 3 / 72 / 00 SESSION FIXATION ERROR 3 / 72 / 01 SESSION FIXATION ERROR WRITING LEAD-IN 3 / 72 / 02 SESSION FIXATION ERROR WRITING LEAD-OUT 5 / 72 / 03 SESSION FIXATION ERROR . INCOMPLETE TRACK IN SESSION 5 / 72 / 04 EMPTY OR PARTIALLY WRITTEN RESERVED TRACK 5 / 72 / 05 NO MORE TRACK RESERVATIONS ALLOWED 3 / 73 / 00 CD CONTROL ERROR 1 / 73 / 01 POWER CALIBRATION AREA ALMOST FULL 3 / 73 / 02 POWER CALIBRATION AREA IS FULL 3 / 73 / 03 POWER CALIBRATION AREA ERROR 3 / 73 / 04 PROGRAM MEMORY AREA UPDATE FAILURE 3 / 73 / 05 PROGRAM MEMORY AREA IS FULL 3 / 73 / 06 RMA/PMA IS ALMOST FULL 0 / 00 / 00 NO ADDITIONAL SENSE INFORMATION B / 00 / 06 I/O PROCESS TERMINATED 2 / 04 / 00 LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE 2 / 04 / 01 LOGICAL UNIT IS IN PROCESS OF BECOMING READY 2 / 04 / 02 LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUIRED 2 / 04 / 03 LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED 2 / 04 / 04 LOGICAL UNIT NOT READY, FORMAT IN PROGRESS 2 / 04 / 07 LOGICAL UNIT NOT READY, OPERATION IN PROGRESS 2 / 04 / 08 LOGICAL UNIT NOT READY, LONG WRITE IN PROGRESS 4 / 05 / 00 LOGICAL UNIT DOES NOT RESPOND TO SELECTION 5 / 07 / 00 MULTIPLE PERIPHERAL DEVICES SELECTED 4 / 08 / 00 LOGICAL UNIT COMMUNICATION FAILURE 4 / 08 / 01 LOGICAL UNIT COMMUNICATION TIME-OUT 4 / 08 / 02 LOGICAL UNIT COMMUNICATION PARITY ERROR 6 / 0A / 00 ERROR LOG OVERFLOW 1 / 0B / 00 WARNING 1 / 0B / 01 WARNING - SPECIFIED TEMPERATURE EXCEEDED 1 / 0B / 02 WARNING - ENCLOSURE DEGRADED 5 / 1A / 00 PARAMETER LIST LENGTH ERROR 4 / 1B / 00 SYNCHRONOUS DATA TRANSFER ERROR 5 / 20 / 00 INVALID COMMAND OPERATION CODE 5 / 24 / 00 INVALID FIELD IN CDB 5 / 25 / 00 LOGICAL UNIT NOT SUPPORTED 5 / 26 / 00 INVALID FIELD IN PARAMETER LIST 5 / 26 / 01 PARAMETER NOT SUPPORTED 5 / 26 / 02 PARAMETER VALUE INVALID 6 / 28 / 00 NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED 6 / 29 / 00 POWER ON, RESET, OR BUS DEVICE RESET OCCURRED 6 / 29 / 01 POWER ON OCCURRED 6 / 29 / 02 SCSI BUS RESET OCCURRED 6 / 29 / 03 BUS DEVICE RESET FUNCTION OCCURRED 6 / 29 / 04 DEVICE INTERNAL RESET 6 / 2A / 00 PARAMETERS CHANGED 6 / 2A / 01 MODE PARAMETERS CHANGED 6 / 2A / 02 LOG PARAMETERS CHANGED 6 / 2F / 00 COMMANDS CLEARED BY ANOTHER INITIATOR / 34 / 00 ENCLOSURE FAILURE / 35 / 00 ENCLOSURE SERVICES FAILURE / 35 / 01 UNSUPPORTED ENCLOSURE FUNCTION / 35 / 02 ENCLOSURE SERVICES UNAVAILABLE / 35 / 03 ENCLOSURE SERVICES TRANSFER FAILURE / 35 / 04 ENCLOSURE SERVICES TRANSFER REFUSED 5 / 3D / 00 INVALID BITS IN IDENTIFY MESSAGE 2 / 3E / 00 LOGICAL UNIT HAS NOT SELF-CONFIGURED YET 4 / 3E / 01 LOGICAL UNIT FAILURE 4 / 3E / 02 TIMEOUT ON LOGICAL UNIT 6 / 3F / 00 TARGET OPERATING CONDITIONS HAVE CHANGED 6 / 3F / 01 MICROCODE HAS BEEN CHANGED 6 / 3F / 02 CHANGED OPERATING DEFINITION 6 / 3F / 03 INQUIRY DATA HAS CHANGED 4 / 40 / NN DIAGNOSTIC FAILURE ON COMPONENT NN (80H-FFH) 5 / 43 / 00 MESSAGE ERROR 4 / 44 / 00 INTERNAL TARGET FAILURE B / 45 / 00 SELECT OR RESELECT FAILURE 4 / 46 / 00 UNSUCCESSFUL SOFT RESET 4 / 47 / 00 SCSI PARITY ERROR B / 48 / 00 INITIATOR DETECTED ERROR MESSAGE RECEIVED B / 49 / 00 INVALID MESSAGE ERROR 4 / 4A / 00 COMMAND PHASE ERROR 4 / 4B / 00 DATA PHASE ERROR 4 / 4C / 00 LOGICAL UNIT FAILED SELF-CONFIGURATION B / 4D / NN TAGGED OVERLAPPED COMMANDS (NN = QUEUE TAG) B / 4E / 00 OVERLAPPED COMMANDS ATTEMPTED 6 / 5A / 00 OPERATOR REQUEST OR STATE CHANGE INPUT 6 / 5A / 01 OPERATOR MEDIUM REMOVAL REQUEST 6 / 5B / 00 LOG EXCEPTION 6 / 5B / 01 THRESHOLD CONDITION MET 6 / 5B / 02 LOG COUNTER AT MAXIMUM 6 / 5B / 03 LOG LIST CODES EXHAUSTED 6 / 5D / 00 FAILURE PREDICTION THRESHOLD EXCEEDED 6 / 5D / FF FAILURE PREDICTION THRESHOLD EXCEEDED (FALSE) 4 / 65 / 00 VOLTAGE FAULT 4 / 00 / 17 CLEANING REQUESTED 3 / 02 / 00 NO SEEK COMPLETE 3 / 06 / 00 NO REFERENCE POSITION FOUND 4 / 09 / 00 TRACK FOLLOWING ERROR 4 / 09 / 01 TRACKING SERVO FAILURE 4 / 09 / 02 FOCUS SERVO FAILURE 4 / 09 / 03 SPINDLE SERVO FAILURE 4 / 09 / 04 HEAD SELECT FAULT 3 / 11 / 00 UNRECOVERED READ ERROR 3 / 11 / 01 READ RETRIES EXHAUSTED 3 / 11 / 02 ERROR TOO LONG TO CORRECT 3 / 11 / 05 L-EC UNCORRECTABLE ERROR 3 / 11 / 06 CIRC UNRECOVERED ERROR 3 / 11 / 0F ERROR READING UPC/EAN NUMBER 3 / 11 / 10 ERROR READING ISRC NUMBER 3 / 15 / 00 RANDOM POSITIONING ERROR 3 / 15 / 01 MECHANICAL POSITIONING ERROR 3 / 15 / 02 POSITIONING ERROR DETECTED BY READ OF MEDIUM 1 / 17 / 00 RECOVERED DATA WITH NO ERROR CORRECTION APPLIED 1 / 17 / 01 RECOVERED DATA WITH RETRIES 1 / 17 / 02 RECOVERED DATA WITH POSITIVE HEAD OFFSET 1 / 17 / 03 RECOVERED DATA WITH NEGATIVE HEAD OFFSET 1 / 17 / 04 RECOVERED DATA WITH RETRIES AND/OR CIRC APPLIED 1 / 17 / 05 RECOVERED DATA USING PREVIOUS SECTOR ID 1 / 17 / 07 RECOVERED DATA WITHOUT ECC - RECOMMEND REASSIGNMENT 1 / 17 / 08 RECOVERED DATA WITHOUT ECC - RECOMMEND REWRITE 1 / 17 / 09 RECOVERED DATA WITHOUT ECC - DATA REWRITTEN 1 / 18 / 00 RECOVERED DATA WITH ERROR CORRECTION APPLIED 1 / 18 / 01 RECOVERED DATA WITH ERROR CORR. & RETRIES APPLIED 1 / 18 / 02 RECOVERED DATA - DATA AUTO-REALLOCATED 1 / 18 / 03 RECOVERED DATA WITH CIRC 1 / 18 / 04 RECOVERED DATA WITH L-EC 1 / 18 / 05 RECOVERED DATA . RECOMMEND REASSIGNMENT 1 / 18 / 06 RECOVERED DATA . RECOMMEND REWRITE 5 / 21 / 00 LOGICAL BLOCK ADDRESS OUT OF RANGE 2 / 30 / 00 INCOMPATIBLE MEDIUM INSTALLED 2 / 30 / 01 CANNOT READ MEDIUM . UNKNOWN FORMAT 2 / 30 / 02 CANNOT READ MEDIUM . INCOMPATIBLE FORMAT 2 / 30 / 03 CLEANING CARTRIDGE INSTALLED 2 / 30 / 07 CLEANING FAILURE 3 / 31 / 00 MEDIUM FORMAT CORRUPTED 2 / 3A / 00 MEDIUM NOT PRESENT 2 / 3A / 01 MEDIUM NOT PRESENT - TRAY CLOSED 2 / 3A / 02 MEDIUM NOT PRESENT - TRAY OPEN 3 / 57 / 00 UNABLE TO RECOVER TABLE-OF-CONTENTS 6 / 5E / 00 LOW POWER CONDITION ON 6 / 5E / 01 IDLE CONDITION ACTIVATED BY TIMER 6 / 5E / 02 STANDBY CONDITION ACTIVATED BY TIMER 6 / 5E / 03 IDLE CONDITION ACTIVATED BY COMMAND 6 / 5E / 04 STANDBY CONDITION ACTIVATED BY COMMAND 5 / 63 / 00 END OF USER AREA ENCOUNTERED ON THIS TRACK 5 / 64 / 00 ILLEGAL MODE FOR THIS TRACK 3 / 73 / 00 CD CONTROL ERROR 3 / 0C / 00 WRITE ERROR 3 / 0C / 07 WRITE ERROR - RECOVERY NEEDED 3 / 0C / 08 WRITE ERROR - RECOVERY FAILED 3 / 0C / 09 WRITE ERROR - LOSS OF STREAMING 3 / 0C / 0A WRITE ERROR - PADDING BLOCKS ADDED 5 / 27 / 00 WRITE PROTECTED 5 / 27 / 01 HARDWARE WRITE PROTECTED 5 / 27 / 02 LOGICAL UNIT SOFTWARE WRITE PROTECTED 5 / 27 / 03 ASSOCIATED WRITE PROTECT 5 / 27 / 04 PERSISTENT WRITE PROTECT 5 / 27 / 05 PERMANENT WRITE PROTECT 2 / 30 / 04 CANNOT WRITE MEDIUM . UNKNOWN FORMAT 2 / 30 / 05 CANNOT WRITE MEDIUM . INCOMPATIBLE FORMAT 5 / 30 / 08 CANNOT WRITE . APPLICATION CODE MISMATCH 5 / 30 / 09 CURRENT SESSION NOT FIXATED FOR APPEND 5 / 30 / 10 MEDIUM NOT FORMATTED 6 / 5A / 02 OPERATOR SELECTED WRITE PROTECT 6 / 5A / 03 OPERATOR SELECTED WRITE PERMIT 1 / 73 / 01 POWER CALIBRATION AREA ALMOST FULL 3 / 73 / 02 POWER CALIBRATION AREA IS FULL 3 / 73 / 03 POWER CALIBRATION AREA ERROR 3 / 73 / 04 PROGRAM MEMORY AREA UPDATE FAILURE 3 / 73 / 05 PROGRAM MEMORY AREA IS FULL 5 / 2C / 03 CURRENT PROGRAM AREA IS NOT EMPTY 5 / 2C / 04 CURRENT PROGRAM AREA IS EMPTY 3 / 72 / 00 SESSION FIXATION ERROR 3 / 72 / 01 SESSION FIXATION ERROR WRITING LEAD-IN 3 / 72 / 02 SESSION FIXATION ERROR WRITING LEAD-OUT 5 / 72 / 03 SESSION FIXATION ERROR . INCOMPLETE TRACK IN SESSION 5 / 72 / 04 EMPTY OR PARTIALLY WRITTEN RESERVED TRACK Notes: 1. All values are in hexadecimal 2. When no value for SK is given, the error is applicable to multiple sense keys. }}} == 참고 == * http://www.isobuster.com/help.php?help=305